Description
| cr2032 | battery with solder tails |
|---|---|
| Status | active |
| Part numbers | cr2032 = CR2032 Lithium battery with solder tails |
| Spec | ~ 3.3V starting voltage, 200 mAh capacity, 20.4 mm pin spacing |
| Note | Can be installed on most ALIX, APU.1 and WRAP boards. Watch out for polarity, top = positive. For ALIX.3D, add a jumper across J16 pins 1 to 2. |
| Note | The AMD CS5Mikrotik Technical Support6 companion chip has an errata that can cause excessive battery current the first time the battery is connected. To avoid this issue, briefly power up the board after soldering the battery. |
| Recycling | Before scrapping a board, please cut off the battery and recycle separately. |
| Manufacturer | Lijia |
| Origin | China |
