30W Single Port Power over Ethernet Midspan IEEE802.3at Compliant Power Injector
Manufacturer:
Phihong
SKU:
H-000862
Details
POE36U-1AT-R Phihong Power Over Ethernet Adapter. POE Plus POE36U-1AT , POE36U , 33.6 Watts 56V 0.6A
High Power Single Port Injector. 33.6 W Power Over Ethernet Adapter. Fully Compliant detection, disconnect and voltage control IEEE802.3af. Diagnostic LEDs. Non-Vented Case. Classification per 802.3at. UNH IOL Tested. Full Protection OCP, OVP. Gigabit Compatible. Can directly replace POE20U-560, POE20U-560G, POE20U-560(G), Outsource VOR-OSP and Black Box LPJ001A-T.
Compatible with Cisco Meraki WAP’s:
Injector IEE802.3af
Power Adapter 12vDC 1.5A
POE31U-1AT
PA1015-120 UK Type
MR18
MR12
MR26
MR16
MR34
MR18
Features
Fully Compliant detection, disconnect and voltage control IEEE802.3at .
Diagnostic LEDs .
Non-Vented Case .
Classification per 802.3at .
UNH IOL Tested .
Full Protection OCP, OVP .
Gigabit Compatible .
POE PLUS
Applications
IP Telephones
Security Cameras
Wireless Network Access Points
IP Print Servers
Blue Tooth Access Point
Safety Approvals
cUL / UL
CE
Mechanical Characteristics
Lentgth : 140mm (5.51in)
Width : 65mm (2.55in)
Height : 36mm (1.42in)
Weight : 0.2kg (0.44lb)
Output Specification
DC Output Voltage : 56V ( pins 1&2 -ve or ground, pins 3&6 +ve)
Min Load : 0A , Max Load : 0.60A
Regulation Line / Load : 54-57Vdc under all conditions
Total Output Power : 33.6W
DC Offset : No Data degradatio with DC imbalance 18mA
Over Voltage / Current , Short Circuit Protection
Outputs equipped with short circuit protection and overload protection as per 802.3at specification. The output can be shorted permanently without damage.
Input
AC Input Voltage Range : 90 to 264 VAC
AC Input Voltage Rating : 100 to 240 VAC , 47-63 Hz
AC Input Current : 1.0A (RMS) max. for 90 VAC
AC Input Current : 0.55A (RMS) max. for 240 VAC
Input Connector : IEC320 inlet 3 pin .
NB: Images are indicative only
Additional Information
POE36U-1AT 33.6W Phihong 1 Port POE Midspan adapter