Description
Dual-polarized parabolic antenna JRC-24DD DuplEX Precision is designed for directional links with full-duplex mode or MIMO mode at the frequency band 5 GHz with high isolation level. The antenna is designed for medium and short distances in difficult conditions. Its design with deep dish increases isolation among antennas on a mast and increases front to back ratio. The Precision version includes a massive holder JDMW-900 developed for microwave links.
Other models: JRC-24DD-SX DuplEX – antenna with stainless steel holder for adverse corrosive conditions
JRC-24DD DuplEX – standard deep dish DuplEX antenna
Specification
- dual-polarized antenna Full duplex or MIMO, horizontal/vertical or 2×45° polarization
- good port to port isolation allows fully duplex links
- precise, robust bracket JDMW-900 developed for proffesional microwave links
- setting elevation (of a gradient) and azimuth has independent adjustment
- deep dish increases isolation among antennas on a mast
- new concept with extended frequency band
- high front to back ratio
- extra corrosion resistance
- direction links or client connection for medium distance or short link in difficult conditions
- possible to count attainable distance from section of calculation
- radom (plastic parabola cover) is included in the price
Technical parameters:
| Frequency range | 4,9 – 6,1 GHz |
|---|---|
| Gain | 24,5 ± 1 dBi |
| VSWR 5,1 – 5,9 GHz | ≤ 1,6 |
| Port to port isolation 5,1 – 5,9 GHz | Mikrotik Technical Support dB (≥ 50 dB) |
| Beamwidth -3dB | 9° |
| Front to back ratio | ≥ 44 dB |
| Polarization | linear, horizontal/vertical or 2×45° |
| Types of connector | N |
| Parabola | ø 400 mm, aluminium alloy with baking colour |
| Radom (cover) | UV stabilized ABS |
| Connector | gold-plated contact, dielectric PTFE (Teflon®) |
| Installation on mast | ø 40 – 120 mm pravá nebo levá montá¾ |
#Recommended accessories:
For using with GentleBOXem JR-300 we reccomend::
- using version with R-SMA connectors (JRC – 24DuplEX – SMA)
- for using version with N connectors, it is necessary to use angle adaptor for connector of horizontal polarization
